Digital Scale Not Working After Battery Change | Reasons & Remedies

Have you recently changed the battery of your digital weighing scale, only to find that it is not working? Is it not reading correctly? Something seems to be wrong with your digital scale. You are not alone! This is a common problem faced by many people and can be easily fixed. 

If you are looking for information on both the reasons & remedies for what to do if your digital scale is not working after battery change, this article will provide useful insights. So, without any further ado, let’s jump in together.

How Do I Change Batteries In My Digital Scale

If you want to change the battery in your digital weighing scale, you need to find out what type of battery it uses. There are two types of batteries used by most digital scales. Some scales use the CR2032 type, while others use the CR1025 type. 

The key is to open up your battery compartment and see which kind is in there, then go from there. For most scales, the batteries live in a slot on the bottom. In order to change it, you will need to first unplug the device by pulling its plug or wires out of the wall or turning off a properly installed wireless scale.

At the underside of the scales you’ll find their battery compartment.  First, you need to unplug the scale and pull or push all of its wires out of the wall outlet or turn off a properly installed wire-free scale. 

Then, grab the old battery, insert the new battery with your thumb draining any residual liquid from it. Now, close the compartment door. Make sure that screws are securely tightened and hold tight side panels before turning back on and retake measurements with your scale for accurate results.

Make sure the area is clean and free of obstacles that could scratch or damage the battery. Use heat to shrink the protective seal on the battery before installing it – this will make installation easier. Finally, make sure the wires are connected correctly, and don’t force anything if it doesn’t seem to be working correctly.

Why Digital Scale Not Working After Battery Change

Here is a list of issues that might be the reasons behind a digital scale not working after battery change –

Battery Terminals and Power Cables

The first thing to check is the battery. If the battery is dead or low, then you will need to replace the battery. If the battery is not dead, but it doesn’t want to take a charge then you may need to replace the power cord that connects your digital scale to an outlet.

If your digital scale is not working after replacing the battery, chances are there may be some issue with the power source. First check if the battery terminals and cables are connected properly. 

Incorrect Type of Batteries

Make sure you have used the correct type of batteries for your particular device – different types of batteries may require different voltages (e.g. alkaline or lithium). If you’re using incorrect batteries this may lead to inaccurate measurement, if not damaging the digital scale for good.

Damaged Underside and Back of the Scale

Inspect the underside and back of the scale for any signs of corrosion or damage which may abnormally affect its functioning. 

Aligned in Uneven Surface

A device with a digital display, like a scale, is designed to work on only one level surface. If you ever needed to replace the battery in a scale, be aware that the delicate electronics inside can be irreparably damaged if you don’t re-calibrate the weight configuration afterward.

If you have recently moved to a new place, and after changing the battery, if it’s not working properly and showing wrong readings this lying on an uneven surface may be the reason.

Remedies of Digital Scale Not Working After Battery Change

First, reset the scale by pressing the “Reset” button. Next, make sure that your batteries are in good condition and properly installed. Finally, verify your scale is on a level surface, calibrate it if necessary, and check the batteries and LCD panel.

If you’re still not sure what’s the problem, then try the following troubleshooting steps. Here is a list of remedies of a digital scale not working after battery change –

Replace the Batteries and Clean the Terminals

If the power button on your bathroom scale does not work, rust on one of the battery connectors may be to blame. This corrosion prevents the unit’s newly installed batteries from supplying it with electricity. Take out the fresh batteries and look for any traces of corrosion on the terminals that the old batteries may have left behind.

Sand the connections in the battery compartment of the scale using a piece of sandpaper cut to a suitable size, then replace the batteries with fresh ones and attempt to turn on the scale once more. If this does not bring your scale back to life, I ask that you please look into other potential solutions.

Reset the Weighing Scale

If your digital scale is not working after you replace the battery, reset it by pressing the “Reset” button. This will restore the scale to its factory settings and resolve any issues that may have occurred. Make sure that the new battery is installed properly and press the “On/Off” button to turn on the scale. 

If that doesn’t work, try unplugging and replugging in the power cord. Refer to your owner’s manual for specific instructions on how to do this. A simple resetting your digital scale might be the easiest way to solve the inaccurate readings.

Align on A Flat Surface 

You may have experienced a dreaded pause from your kitchen appliances that are digital scale once you changed the battery. Everyone, of course, understands that one of the most common reasons for issues with those digital scales is an incorrectly replaced battery or bad print head kits.

The problem with your digital scales may also have been occurring because it was not properly aligned with the surface in the kitchen appliances and sometimes can happen right after a house move and needed to also calibrate it because there was a change of atmosphere surrounding it.

Calibrate Your Scale

If your digital scale is not working after battery change, it may be due to calibration issues. Follow these simple steps to calibrate the scale: First, place the scale on a level surface and position the pointer over “zero.” 

Next, slowly move the weight until the pointer reads “one” next to zero on the screen. Repeat this process for each of the other numbers on the scale until all readings are correct. Once the scale is calibrated, you can use it to measure anything with precision.

Replace the Power Cable From a Certified Repair Shop

Different electrical appliances such as, television, mini-fridges, microwave ovens including digital scales all of these face these defective power source and cord problems. This is a very unnoticeable common issue. 

If all of the above fails, it could be that the power source has failed and needs replacing. If this is the case, take your digital weighing scale to a certified repair shop. A quality power cord looks like a simple wire but this can be the source of your problem. 

Make sure that your batteries are in good condition and properly installed, and your scale should work just fine. So, before starting to use your kitchen scale or bathroom scale, make a check to its power cord.

Contact the Manufacturer for Assistance

If your problem is still not solved you should contact the manufacturer for assistance. If you have a warranty, you’re lucky. They will solve the problem without charging you any money. And, if you’re out of warranty, then you’ll need to pay some extra bucks to get the job done.

By following these steps, hopefully you will successfully restore your digital weighing scale back to its normal functioning state! In any case make sure you follow safety precautions when dealing with small electronics as mishandling may lead to electrocution or other hazards. Good luck!

Pro Tips While Changing Digital Scale’s Batteries

When it comes to changing the batteries in your digital scale, there are some important things you should consider. It’s not as simple as just popping them in and out – there is potential for damage if you don’t take necessary safety precautions. Here are just a few tips to remember: 

1) Make sure that the power switch on your scale has been turned off before attempting to change the battery. This will help prevent electric shocks, short circuits, and other hazards. 

2) When handling the new or old batteries, make sure you use caution. Be careful not to drop them as this could cause them to leak dangerous chemicals which can be harmful if they come into contact with skin or eyes. Wear protective gloves when handling the batteries. 

3) Check the specifications of your digital scale to ensure that you are using the correct battery type and size. Using a different size or type could cause damage to your device, so it’s important to double-check before inserting them in. 

4) Make sure all connections are secure when replacing the battery. This includes ensuring that all contact points are properly lined up and that the battery has been inserted correctly in its holder. Preventing any loose wires or connectors will help keep your digital scale running smoothly for longer. 

5) Keep any extra batteries stored away from moisture or heat sources which can degrade their performance quickly over time. Only use these backups if necessary. 

FAQ on Digital Scale’s Battery Changing

1. How Often Should You Change The Battery In Your Scale?

Unfortunately, the majority of scales do not provide the battery cover as a replacement part, just like our smartphones. Yet, some more recent versions include an easily removable battery. If a family of four to five members use it to weigh themselves once a day, the lithium battery will last for around eight to ten years.

2. Where Is The Battery Compartment On A Thinner Digital Scale?

Battery compartments are usually found on the back of the bathroom scales or kitchen scales. But, it’s really difficult nowadays to remove the cover and change the batteries. Since, the recent scales do not allow you to change the batteries they provide. You should visit their shop with your scale and they will do the rest to uncover or change the batteries.

Final Words

If your digital scale is not working after battery change, there are a few things that you can do to troubleshoot the issue. Reset the scale, and make sure that your batteries are in good condition and properly installed. Finally, test the scale to see if the issue is resolved. If not, calibrate the scale and check the batteries again. If the issue still persists, you better contact the manufacturer.